When registering your Surron regardless of model - it is important to know that the licensing requirements and registration categories will vary from State to state so be sure to check with your local authority as to what requirements and licence is necessary to ride on the road.
For information on licensing Read this Article here.
Keep in mind that when your Bike is new, typically in most states you do not need a Safety Inspection Certificate (or equivalent) for the first initial registration although if the bike has been used and ridden more than 500km's before it is registered and is recorded on your bike's Odometer/Display it will then be considered as "Used" and you may be required to present a valid safety inspection certificate upon registration, as the vehicle will then be deemed as a "used vehicle".
Note: Only Surron Light Bee's and Storm’s Sold after May 2022 are eligible to be road registered as any previous models have not be ADR complied.
Registering your SurRon Light Bee L1E
The Surron Light Bee L1E is considered as a "LA" Moped Category vehicle and in some states such as Queensland you can in fact ride your L1E on the road on a regular drivers licence as it is governed to 50km/h and complies with Moped category regulations where as other states you will require a valid motorcycle licence (see our licensing article above for more info).
Steps to register your SurRon Light Bee L1E
- Download & Print the Light Bee L1E VIA Certificate and take this document along with your Receipt/Proof of Purchase with you to your transport office. You can also download your invoice via the link on your order confirmation email.
- Complete a "Green Slip" Insurance Slip or Similar if Required by your State Authority. We recommend Allianz if you are in NSW.
- Take your New Surron to your Local transport office that does physical vehicle inspections. As the vehicle is new, typically your road authority office will need to inspect and record the VIN plates etc. (Not all offices provide this service, be sure to check with your local office if need be prior to arrival)
- Complete the necessary "New Vehicle Registration" documents at your local authority.
- Pay your registration and on road costs
- Install your new plates to the bike and away you go!
Registering Your Storm Bee Enduro/Road
The Surron Storm Bee is considered as a "LC" Motorcycle Category vehicle and allows you to ride on a LAMS / provisional approved motorcycle licence (or above) on the road in most states of Australia as it complies with LAMS / Provisional category regulations - although be sure to check with your local authority first or visit our article above on licensing.
Steps to register your SurRon Storm Bee
- Download & Print the Storm VIA Certificate and take this document along with your Receipt/Proof of Purchase with you to your transport office. You can also download your invoice via the link on your order confirmation email. In some states you may be required to take your Certificate & Vehicle details (located in your manual/bike box) - this includes all your bikes specifications and particulars.
- Complete a "Green Slip" Insurance Slip or Similar if Required by your State Authority. We recommend Allianz if you are in NSW.
- Take your New Surron to your Local transport office that does physical vehicle inspections. As the vehicle is new, typically your road authority office will need to inspect and record the VIN plates etc. (Not all offices provide this service, be sure to check with your local office if need be prior to arrival)
- Complete the necessary "New Vehicle Registration" documents at your local authority.
- Pay your registration and on road costs
- Install your new plates to the bike and away you go!
